The Flooring Expert
1100/3003/3105/5052/6061 Aluminum Alloy Coil for Building Construction Used
|
1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%)
|
|
|
Purity
|
1050 1050A 1060 1070 1100
|
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/
H26/H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C)
|
|
Application
|
Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc.
|
|
Feature
|
Lid Shigh conductivity, good corrosion resistant performance, high latent heat
of melting, high-reflectance, well welding property, low strength, and not suitable for heat treatments. |
|
2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element)
|
|
|
Alloy
|
3003 3004 3005 3102 3105
|
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/
H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C)
|
|
Application
|
Decoration, heat-sink device, external walls, storage, sheets for construction, etc.
|
|
Feature
|
Good rust resistance, not suitable for heat treatments, good corrosion resistant
performance, well welding property, good plasticity, low strength but suitable for cold working hardening |
|
3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element)
|
|
|
Alloy
|
5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06
|
|
Temper
|
O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34
H16/H26/H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
|
Application
|
Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile
Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
|
Feature
|
All the advantages of normal aluminium alloy, high tensile strength & yield strength,
good corrosion resistant performance, well welding property, well fatigue strength, and suitable for anodic oxidation. |
|
4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements )
|
|
|
Alloy
|
6061 6063 6082
|
|
Temper
|
O F, etc.
|
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
|
Application
|
Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components,
Transport Ship, Semiconductor Equipments, etc |
|
Feature
|
Good corrosion resistant performance, well welding property, good oxidability,
easy to spray-finishing, well oxidation coloring, good machinability. |
1. It is used as a decorative material.
2. Used to make profiles such as door and window frames and window sashes
3. In the construction industry, it can be used as building materials, mechanical parts and architectural decorations.
4. Used as a conductor to make artificial metal.
5. It can be made into rods and tubular parts, which are widely used in the instrument industry.
6. It can be used as precision casting aluminum alloy ingot.
7. It can be used to make automobile fuel tanks.
8. Can be used as mold material.
9. Can be used in the chemical industry.
10. Can be used in the machinery industry.
Note:
1.Free sampling, 100% after-sales quality assurance, Support any payment method;
2.All other specifications of round carbon steel pipes are available according to your requirement (OEM&ODM)! Factory price you will get from .
|
WIDTH(MM) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
|
1000 |
1 |
2 |
3 |
4 |
Other |
|
1219 |
1 |
2 |
3 |
4 |
Other |
|
1220 |
1 |
2 |
3 |
4 |
Other |
|
1500 |
1 |
2 |
3 |
4 |
Other |
|
2000 |
1 |
2 |
3 |
4 |
Other |
The production process of aluminum coils: aluminum ingots are put into the smelting furnace, burned and melted with natural gas, slag is removed and waste is removed, alloy is configured, the guide furnace is transferred to the holding furnace, aluminum water is put in, passed through the die casting nozzle, rolled and rolled, and rolled and rolled Rolling, annealing, cross-cutting to the required size, engraving according to the drawings, folding, reinforcing ribs, welding, grinding, spraying, inspection, pasting of protective film, air cushion film, packaging, loading and delivery.
Here are some key factors to consider when inspecting aluminum coils:
1. Size: Check the size of the coil against the specifications provided by the manufacturer. Make sure they are the correct thickness, width and length.
2. Surface quality: Check the coil surface for scratches, dents or other defects. The surface should be smooth without any visible damage.
3. Color consistency: the color of the coil should be consistent throughout the coil. Any change in color could indicate a problem with the production process.
4. Coating thickness: If the coil has coating, the coating thickness should be checked to ensure that it meets the specified requirements. Coatings that are too thin or too thick can affect the durability and performance of the product.
5. Chemical composition: analyze the chemical composition of aluminum to ensure it meets the required standards. This includes checking for impurities or other elements that could affect product quality.
6. Packaging and Labeling: Ensure that rolls are properly packaged and labeled for shipping and storage. Packaging should be strong and designed to protect the coil during transport.
7. Manufacturing Process: The manufacturing process is inspected to ensure it meets the required standards and that all equipment is properly maintained and functioning.
An effective inspection process will help identify any potential issues with the product and ensure it meets the required quality standards.
Packaging is generally naked, steel wire binding, very strong.
If you have special requirements, you can use rust proof packaging, and more beautiful.
Transportation: Express (Sample Delivery), Air, Rail, Land, Sea shipping (FCL or LCL or Bulk)
Q: Are u a manufacturer?
A: Yes, we are spiral steel tube manufacturer locates in Daqiuzhuang village, Tianjin city, China
Q: Can I have a trial order only several tons?
A: Of course. We can ship the cargo for u with LCL serivece.(Less container load)
Q: Do u have payment superiority?
A: For big order, 30-90 days L/C can be acceptable.
Q: If sample free?
A: Sample free, but the buyer pays for the freight.
Q: Are you gold supplier and do trade assurance?
A: We seven years cold supplier and accept trade assurance.
WHY CHOOSE US
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..