When the thunderstorm season is coming, lightning protection is particularly important at this time. Lightning enters the room through power lines or other ways, causing damage to people and equipment; Lightning Protection Company has many excellent lightning protection products, of which the surge protector of power supply is an important part. Now we will briefly introduce the parameters and uses of a first-class surge protector.
(1) in the front end of the main power switch in the floor distribution box, LH-50I 4P is generally used as the primary protection of power supply;
② LH-50I 4P should also be used at the low voltage end of transformer and the front end of main power switch.
③ When the distribution box is independent outdoors, LH-50I 4P should also be used as the primary power protection.Equipment connected to AC power supply network is easily affected by many electrical problems that may be expected in unstable operation, which leads to equipment failure, life reduction and even damage. LH-15I series surge protectors are designed to meet the protection requirements of all low-voltage devices for industrial lightning surge. The product range of this series is classified by product type and power supply category (AC or DC).
LH-200/4p
Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 100KA
Maximum discharge current Imax 200KA
Voltage protection level Up ≤ 3.6KV
Appearance: full arc, no window and no words, white, pad printing
LH-150/4p
Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 80KA
Maximum discharge current Imax 150KA
Voltage protection level Up ≤ 3.0KV Appearance: arc, window, no characters, white, pad printing
LH-120/4p
Maximum continuous operating voltage Uc 385V~
Nominal discharge current In 60KA
Maximum discharge current Imax 120KA
Voltage protection level Up ≤ 2.5KV
Appearance: arc, window, word, white, laser marking
MODEL: LH-80 1/385-4 |
LH | Lightning pick surge protector |
80 | Maximum discharge current: 80, 100, 120, 150KA…… | |
I | I represents T1 products; default: represents T2 products | |
385 | Maximum continuous operating voltage: 385, 440V~ | |
4 | Mode: lp, 2p, 1+NPE, 3p, 4p, 3+NPE |
Model | LH-80 | LH-100 | LH-120 |
Maximum continuous operating voltage Uc | 275/320/385/440V~(Optional and customizable) | ||
Nominal discharge current In (8/20) | 40 | 60 | 60 |
Maximum discharge current Imax (8/20) | 80 | 100 | 120 |
Protection level Up | ≤1.8/2.0/2.2/2.4KV | ≤2.0/2.2/2.4/2.5KV | ≤2.3/2.5/2.6/2.7KV |
Optional appearance | Plane, full arc, arc (optional, customizable) | ||
Can add remote signal and discharge tube | Can add remote signal and discharge tube | ||
working environment | -40 ℃~+85℃ | ||
Relative humidity | ≤95%(25℃) | ||
colour | White, red, orange (optional, can be customized) | ||
Remark | Power surge protector, suitable for three-phase five-wire power supply system, guide rail installation. |
1. product design standard: this product is designed according to relevant international standards IEC, and its performance meets the requirements of national standard GB 18802.1-2011 “low voltage surge protector (SPD) part 1: performance requirements and test methods of surge protector for low voltage distribution system”.
2. Scope of product use: GB50343-2012 Technical Code for Lightning Protection of Building Electronic Information System
3 Selection of surge protector: The primary SPD must be set in the main distribution box at the entrance of building power supply.
4. Product features: This product has the characteristics of low residual voltage, fast response speed, large current capacity (impulse current Iimp(10/350μs) is 25kA/ line, long service life, simple maintenance and convenient installation, etc.
5.Working temperature: -25℃ ~+70℃, working humidity: 95%.
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..