The Flooring Expert

This product effectively catches formaldehyde floating in air and turns it into harmless water molecules, therefore reducing formaldehyde pollution after home remodeling and creating a healthy environment.

It is highly efficient, odorless and free of seven additives. It has passed UL GREENGUARD Gold Certification, French Indoor Air Emissions A+ Certification and China Green Product Certification and meets the more stringent Health+ Water-Based Coating Standard. It is also highly washable and alkali resistant and has an excellent hiding power. It solves various wall problems and has a lasting brightness.

It is widely used in the interior wall decoration and protection in villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

China Green Product Certification

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free of 7 additives

Better Function, Better Performance

The“Formaldehyde to water”technology effectively reduces formaldehyde in air, without saturation and second release

One-Package Solution to Wall Problems

High scrub resistance

Excellent hiding power

Strong resistance to alkali

Can be made into light colors

Doubled anti-mold effect

Easier application

Endurable brightness

1. China Green Product Certification: according to GB/T 35602 Green Product Assessment-Coating Material.

2. Free from 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), excessive heavy metal pigments and fillers, APEO, ethylene glycol ether and ether ester, as well as PAEs. For details, refer to the China Environmental Labelling Product Certification Requirements.

3. This product is undergoing packaging upgrading. Existing products with the old packaging will continue to be sold. Products in new and old packaging are of the same quality and quantity. Please feel free to use them.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application conditions: Wall temperature ≥5 ℃, humidity ≤85 %, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12-14㎡/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, hard drying 2 hours, recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect..

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) – primer (3TREES Health+ Series Primer) – apply 1 round – topcoat (360 Anti-Formaldehyde Wall Paint) – apply 2 rounds

Tool cleaning: After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.
   

3. For more information, please refer to the product safety label..