The Flooring Expert

300ml/piece

This product is suitable for most substrates, such as wood, stone, metal, ceramic, glass, plastic, rubber, gypsum board, fiberboard, various artificial materials, and handicrafts. It is widely used in construction, advertising, decoration and manufacturing industries.

China Environmental Labelling certification, strong bonding, fast positioning, wide application range, formaldehyde-free

1. Clean the surface of the substrate to ensure it is free of oil stains and dust;

2. Cut the top of the rubber hose, pierce the inner tin foil layer with the rubber nozzle, cut the rubber nozzle into the required size and shape along the 45° direction, then install the rubber nozzle on the rubber hose, and finally place the rubber hose on the rubber gun;

3. Apply the nail to the surface of the substrate in dots, stripes or zigzags. Single-side application will do.

Dry bonding method

Extrude the nail onto one bonding surface, press the two bonding surfaces together, then pull them apart, leave them to cool down for 3-5 minutes (no more than 10 minutes), and then press the two sides together to achieve the positioning effect quickly.

Wet bonding method

Squeeze the nail onto one bonding surface, press the two bonding surfaces together, and fix them with tape or clamp immediately. After the initial bonding of the nail (about 24 hours), remove the tape or clamp and other temporary fixtures.

Tips:

No auxiliary fixation is needed for bonding plane surfaces or light objects;

For bonding heavy facades, early auxiliary fixation is needed for both the dry and wet bonding methods

JC/T2186-2013 Mastic Adhesives for Fixing Wallboards

GB 18583-2008 Indoor Decorating and Refurbishing Materials – Limit of Harmful Substances

The product has a storage life of 18 months when stored in a cool, dry and ventilated environment below 30℃

1. Prevent children from eating by mistake and contact with the skin and eyes;

2. This product should not be placed close to inflammables. It is recommended to apply the product in a well-ventilated area;

3. Avoid using the product in a high temperature environment, such as metal roof and heat pipe. The product is not suitable for bonding water-soaked, oil-seeped or plasticizer materials.

4. The product is made in strict accordance with all the technical indicators of the relevant standards. Due to differences in climate, environment, use method and other factors, performance test should be conducted before use, and the product can only be used after reaching the predetermined effect.