The Flooring Expert

3L & 15L

This product is suitable for use in home decoration, automobile interior, art and advertising industries and can glue plywood, aluminum plastic board, fireproof board, density board, ash board, flax board and other wood materials. It can also glue some metal decorative materials such as iron and aluminum, as well as materials such as rubber, plastic, leather, cartons, fabrics and so on.

Strong initial adhesion, durable weather resistance and easy application

1. Wipe off oily dirt on the bonding surface, then roughen and dry it;

2. Use a scraper or brush to apply the adhesive evenly from inside to outside on the bonding surface (in case of large-area bonding, it is recommended to apply on both bonding surfaces at the same time), and leave it to cool down in the air for 5~ 15 minutes (to the degree that the adhesive layer is non-sticky to the hands);

3. Align the bonding surface at one time, squeeze from inside to outside (to eliminate air bubbles), tap and compact with a rubber or wooden hammer, and it can reach the use strength after 24 hours.

The storage life is 18 months in a cool, dry and ventilated environment below 5℃-30℃.

GB 18583-2008 Indoor Decorating and Refurbishing Materials – Limit of Harmful Substances of Adhesives

1. If hydrogen peroxide or nitrocellulose lacquer thinner is used to treat the reverse side of the material to be glued, it must be done before applying the adhesive;

2. When opening the cover, press and hold the cover surface by hand to prevent the adhesive from spurting due to thermal expansion;

3. This product should not be used under direct sunlight or temperature over 60℃;

4. Keep out of the reach of children;

5. Store in a cool and ventilation place, keep away from fire and prohibit sun exposure.

6. The product is not suitable for the bonding of polyethylene, polypropylene, polytetrafluoroethylene, silicone, snowflake iron, plastic, rubber, PVC and leather materials containing a lot of plasticizers.

When using 3TREES products, it is necessary to operate in strict accordance with the product instructions. When using the product on new materials, difficult-to-stick materials difficult to identify or in special environments, please make a decision after trial gluing or under the guidance of 3TREES’s engineering and technical personnel.