The Flooring Expert

CAL6-100B 10kA Electromagnetic type B RCCB

Short Description:

CAL6-100B series Type B RCD has novel appearance design, compact structure, good reliability, and high safety. The products comply with IEC61008-1, IEC62423 and other standards, and the product certification is complete;They ensure higher protection levels with maximum operational continuity under all working conditions.For this reason, Type B RCDs are considered universal devices because they provide protection against all the tripping waveforms listed in the Standards EN 62423;Type B RCDs are suitable for non-linear circuits that can generate leakages with high direct current (> 6 mA) and/or high frequency components;Type B RCDs can ensure maximum safety in many applications,such as EV Charging Station,Crane and Elevator,PV and Wind power plants,etc.


Product Detail

Product Tags

Technical Data

Electrical Features

Mode Electromagnetic
Type(wave form of the earth leakage sensed)Rated current In B25,40,63,80,100A
Poles 2P,4P
Rated voltage Ue 2P 240V~, 4P 415V~
Insulation voltage Ui 500V
Rated frequency 50/60Hz
Rated residual operation current(I△n) 30, 100, 300mA
Rated residual making and breaking capacity (I△m) 500A(In≤40A), 10In(In>40A)
Short-circuit current Inc= I△c 10,000A 10000
SCPD fuse
Break          time          under          I△n Rated impulse withstand voltage(1.5/50) Uimp ≤0.1s 4000V
Dielectric test voltage at ind.Freq. for 1min 2.5kV
Electrical life 2,000 Cycles
Mechanical life 4,000 Cycles

Installation

Contact position indicator Yes
Protection degreeAmbient temperature(with daily average≤35℃) IP20-5℃~+40℃
Storage temperature -25℃~+70℃
Terminal connection type Cable/Pin-type busbar/U-type busbar
Terminal size top/bottom for cable 35mm2 18-3AWG
Terminal size top/bottom for busbar 35mm2 18-3AWG
Tightening torque 2.5Nm 22In-lbs
Mounting On DIN rail EN60715(35mm) by means of fast clip device
Connection Power supply in both directions

Tripping Current Range

Lagging Angle

I△n>0.01A

0.35I△n≤I△≤1.4I△n

I△n≤0.01A

0.35I△n≤I△≤2I△n

90°

0.25I△n≤I△≤1.4I△n

0.25I△n≤I△≤2I△n
135°

0.11I△n≤I△≤1.4I△n

0.11I△n≤I△≤2I△n

  • Previous:
  • Next:

  • Write your message here and send it to us