The Flooring Expert

The machine tool mainly consists of frame, slide, back stopping system, control system and molds, etc.

1. Frame: This part consists of left and right columns, support plate, lower table and other components of the box-shaped frame. The bed is welded with steel plate as a whole, and after welding, the machine is subjected to high temperature aging at 700 degrees for 24 hours, and the surface is treated with shot blasting, which completely eliminates the internal stresses generated during welding, and adopts the heavy-duty design to ensure the rigidity and long-term stability of the machine tool.

2. Slider: This part mainly consists of slider, power box, magnetic scale, screw, rectangular guide rail and other components. Left and right power box with bolts and frame fastening connection, screw and slider using nuts, ball block connection, the structure of the slider can improve the live when subjected to partial load. The slider and the frame are connected by rectangular guide rail. The guide rail is self-lubricating, and only a few drops of oil are needed every week. In the frame on both sides of the C-shaped plate equipped with scales to control the upper limit position of the slider stroke, the lower limit position, the empty stroke and the working stroke of the transition point position, as well as detection, feedback of the synchronized movement of the two screws.

3. Control system: Adopting self-developed numerical control system, according to the plate thickness, material, length and automatic calculation of bending force, automatic calculation of angular error correction.

4. Mold: This part consists of two parts: the upper mold assembly and the lower mold assembly. The upper mold is mounted on the slide, relying on the clamping plate to fix it, the lower mold can be single V, double V and multi-V and other forms, the mold can be segmented according to the user’s requirements.

5. Front feed support: This part is a standard part, installed on the front of the working table. When using, according to the length of the workpiece, the front pallet holder can be moved manually to the appropriate position for fastening, the pallet holder can be adjusted horizontally and vertically.