The thickness of sheet: <0.5mm
The largest width of sheet: <1050mm
The minimum width of shearing sheet: >52mm
Motor power: 1.1kw
Size:1500×1200×800mm
Weight: 1400kg
General situation: this machine is used for batch cutting tinplate or other metal sheet for the following working procedure.
Applied can’s drive: diameter 65~300mm
Applied can’s height: 50~400mm
Motor power:0.25KW
Size:700×700×840mm
Weight:40kg
General situation: the machine is used for round forming of the sheared metal sheets.
Applied sheet thickness:0.16-0.35mm
Welding speed:5-12meters/min
Applied can’s drive: diameter 73~280mm
Applied can’s height: ≤380mm
Copper wire:diameter 1.3-1.5mm
Power consumption: 15kw
Size:1700×1500×2050mm
Weight: main equipment 900kg
General situation: this machine is used for welding metal plates of industry can, food can, aerosol can etc which is backward-in resistance welding machine with small lap volume.
Production capacity: 8-12cans/minute
Main oil circuit pressure: 6.3MPa
Flow: 80L∕min
Oil tank amount: 250L
The type of hydraulic pressure oil: 46# wear-resistant oil
Motor power:5.5kw
Weight: 840kg
Size:1400×850×1320mm
General situation: the machine is mainly used to shape convenient bucket. It can shape the welded round can into the size needed with coning mould by the way of hydraulic pressure.
Production capacity:8-12cans/minute
Main oil circuit pressure:6.3MPa
Flow:80L∕min
Oil tank amount:250L
The type of hydraulic pressure oil:46# wear-resistant oil
Motor power:5.5kw
Net weight:840kg
Size:1400×850×1900mm
General situation: the machine is used for pre-curling & flanging of convenient bucket, and top & bottom flanging of normal & coning bucket.
Production capacity:12-18cans/min
Applicable sheet’s thickness: ≤0.4mm
Applied can’s diameter od diagonal: 50~330mm
Max. Applicable can hegith: 420mm
Motor power: 2.2kw
Air pressure:0.4-0.6MPa
Size: 1000×917×1885mm
Weight: 800kg
General situation: the sealing machine is mainly used for sealing tinplate round can, square can, capacitor and other special shaped can in can-making industry.
Production capacity:8-12 cans/minute
main oil circuit pressure:6.3MPa
Flow:80L∕min
Oil tank amount:250L
The type of hydraulic pressure oil:46# wear-resistant oil
The thickness of sheet: 30-0.55mm
Motor power: 7.5KW,380V,50HZ
Size: 1500×900×2260mm
Weight: 840kg
General situation: the machine is mainly used for curling and beading of 18L、20L convenient bucket.
Production capacity: 10~30cans/ min
Motor power: 15kw
Size: 1340×880×1170mm
Weight: 350kg
General situation: this machine is used for double-end spot welding of conical pail and paint cans’ handles.
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..