The Flooring Expert
DRD Series Oil Electric Lubrication Pump （GEAR TYPE )
Performance and characteristics
·The main host machine PLC controls the oil pump motor to operate without intermittent or intermittent operation.
Perform circulating cooling lubrication.
·With pressure regulating valve (relieving valve) and pressure maintaining valve to control the working pressure of the lubrication pump
Force and prevent oil leakage from the main oil line.
·With dual oil level transmitter, it is convenient for users to monitor the system in the use of oil pump
Oil supply status.
· Oil grade: N22-N68 hydraulic oil, oil viscosity: 30-
2500cSt.
·This lubrication station is widely used in ceramic machinery, textile machinery, mining machinery
For cooling and lubrication on the manufacturing equipment.
·Can change the oil pump configuration according to the user’s specific use requirements, custom sheet metal
tank.
Specification
| Model No. | Standaard Pressure (Mpa ) | Nominal flow rate | Tank volume | Lubricant viscosity | Principle | Votage （V） |
Speed | Choose by yourself according follow technical info | Tank |
| （L/min） | （L） | ||||||||
| DR2.5-3D | 2.0 | 0.25 | 3 | 32-2500CST | Gear pump | AC380 | 1350 | Motor also can accoridng your need to match | Transparent |
| DR2.5-6D | 6 | ||||||||
| DR2.5-9D | 9 | ||||||||
| DR 5-3D | 2.0 | 0.5 | 3 | 2700 | |||||
| DR 5-6D | 6 | ||||||||
| DR 5-9D | 9 | ||||||||
| DR 8-6D | 2.0 | 0.8 | 6 | 1350 | |||||
| DR 8-9D | 9 | ||||||||
| DR16-6D | 4.0 | 1.6 | 6 | 2700 | |||||
| DR16-9D | 9 |
| Model No. | Standaard Pressure (Mpa ) | Nominal flow rate（L/min） | Tank volume（L） | Lubricant viscosity | A | B | L | Votage （V） |
Speed | Tank |
| DR8-6D | 2.0 | 0.8 | 6 | 30-2500CST | 298 | 171 | 284 | AC380 | 1350 | Metal tank |
| DR8-9D | 9 | 351 | 191 | 342 | ||||||
| DR16-6D | 4.0 | 1.6 | 6 | 298 | 171 | 284 | 2700 | |||
| DR16-9D | 9 | 351 | 191 | 342 |
DETAIL OF MOTRO AS FOLLOW
B TYPE MOTOR
1. Installed on the equipment fuel tank, Vertical installation, the oil height can not exceed the installation surface
2. There is a relief valve to prevent the lubrication pump set from overloading.
3. The oil absorption height can be selected according to actual needs, the standard is 165mm
4. The output pipe diameter standard is Φ6 (M10X1). If required,Φ8（M 12×1.25) Please specify
5. Lubrication viscosity: 32-2500CST
6.C No unloading valve, only for resistive or open lubrication systems
7.F H with unloading valve for quantitative centralized lubrication system
8. If you need order pump continuously, add L for example B250FL
| Model No. | Standaard Pressure (Mpa ) | Nominal flow rate | Motor | Output pipe diameter standard | Remark | |||
| （L/min） | Votage | Frequency | Power | Speed | ||||
| （V） | （Hz） | （W） | （r/min） | |||||
| B250C | 1.00 | 0.25 | AC 380 | 50 | 60 | 1350 | Φ6 (M10X1). If need Φ8（M 12×1.25) Please specify | No unloading valve, only for resistive or open lubrication system |
| B500C | 0.5 | 90 | 2700 | |||||
| B250F | 2.00 | 0.25 | 60 | 1350 | with unloading valve for quantitative centralized lubrication system | |||
| B500F | 0.5 | 90 | 2700 | |||||
| B250H | 4.00 | 0.25 | 60 | 1350 | ||||
| B500H | 0.5 | 90 | 2700 | |||||
R TYPE MOTOR
1. Installed on the equipment fuel tank, Vertical installation, the oil height can not exceed the installation surface
2. There is a relief valve to prevent the lubrication pump set from overloading.
3. The oil absorption height can be selected according to actual needs, the standard is 150mm
4. The output pipe diameter standard is Φ6 (M10X1). If need Φ8（M 12×1.25) Please specify
5. Lubrication viscosity: 32-2500CST
6.C No unloading valve, only for resistive or open lubrication systems
7.F H with unloading valve for quantitative centralized lubrication system
8. This type no continuously type
| Model No. | Standaard Pressure (Mpa ) | Nominal flow rate | Motor | Output pipe diameter standard | Remark | |||
| （L/min） | Votage | Frequency | Power | Speed | ||||
| （V） | （Hz） | （W） | （r/min） | |||||
| R800C | 1.00 | 0.80 | AC 380 | 50 | 120 | 1350 | Φ6 (M10X1). If need Φ8（M 12×1.25) Please specify | No unloading valve, only for resistive or open lubrication system |
| R1600C | 1.60 | 180 | 2700 | |||||
| R800F | 2.00 | 0.80 | 120 | 1350 | With unloading valve for quantitative centralized lubrication system | |||
| R1600F | 1.60 | 180 | 2700 | |||||
| R800H | 4.00 | 0.80 | 120 | 1350 | ||||
| R1600H | 1.60 | 180 | 2700 | |||||
WHY CHOOSE US
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..