China Hardware For Aluminum Tilt&Turn Window Manufacturer and Supplier

Hardware For Aluminum Tilt&Turn Window

Short Description:

Hardware For Aluminum Tilt&Turn WindowFriends who live in high-rise buildings must pay attention to the advantages of Hardware For Aluminum Tilt&Turn Window. After the anti-theft upgrade,when the window is opened by inverting,that will be leave a gap, not only for ventilation, but also the thief’s hands can’t reach in, and can prevent rainwater from splashing in. Open the Aluminum Tilt&Turn Window, even if it rains heavily, it will not splash into the room. It can be ventilated, which not only ensures the ventilation but does not occupy the indoor space. In the inverted mode, children cannot get in or out, so don’t worry about Children’s safety all the time.The floor is high, the outward casement windows cannot be opened outwards, and the inner windows are worried about the inconvenience, and they are worried about bumping their heads. If you use Aluminum Tilt&Turn Window, don’t have to worry these problems.

Send email to us

Product Detail

Product Tags

Suitable for aluminum window with standard 15×20/14×18 Euro- slot.Suitable for sash width FFB:500mm-1600mm and height FFH: 580mm-2400mm.

Advantage:

1. Have good prevent wrong operation function, effectively prevent the damage to Windows and doors and hardware for error operation.2.Good Adjustability: Adjustable cams make the sealing after locking meet with the requirement on airtight, watertight and wind-resistant ability. The hinge parts make the casement being adjusted in three directions which brings easier installation for window fabricators. 3. High corrosion resistance: The inside parts are matte- galvanized with trivalent chromium passivation and then protected with sealant lacquer, which guarantees 1000 hours NSS test.. Environmental friendly and no harmful materials.The exposed parts are either treated by anodization or antibacterial powder coating. For anodized parts, the color is gentle and never changed. For powder coating parts, the antibacterial performance conforms to international standard JISZ2801：2000≥2.0.

The world’s favorite lock

No.	ltem Name	ltem No.
1	Top Hinge Parts	YLSJ2004
2	370 Scissor	YLX2001370
	500 Scissor	YLX2001500
	600 Scissor	YLX2001600
3	Corner	YLZJ2001
4	Keeper	YLSK01
5	Drive Bar	YLG01
6	Mis-handling Device Keeper	YLDK01
7	Locking Bolt	YXK01
8	Bottom Corner	YLXZ2001
9	Lift Support	YZSK01
10	Rotary Locking Bolt	YXK02
11	Support Cushion	YLZC01
12	Bottom Hinge Parts	YLXJ2004
13	Handle	YBZ0222 (Powder coating)
13	Handle	YBZ0322(Anodizing)

Aluminum Tilt&Turn Window Reset method:

In the process of daily use, the window sash is loose due to operating errors. We can use the following simple methods to restore. First, we must check whether the handle is inverted, usually facing upwards. If it is not facing upwards, we can press Mis-handling Device Keeper with our hands. Operate Mis-handling Device Keeper and adjust the handle to the inverted state at the same time, then push the hinge side of the window sash hard and close the window sash gently. We press Mis-handling Device Keeper again with our hands and rotate the handle to the flat open state, that is Horizontal position, then you can close the windows normally. Next, let’s check whether the window is back to normal. You can see that the window can be opened normally and can be opened tiltly normally. So far, the window has been reset successfully.