Popular Multifunction For Exterior Wall Coating

Short Description:

Multifunction Exterior Wall Dry Powder Paint Use International Innovative Formula,No Pollution To Indoor And Outdoor Environment. This Product Has Good Hiding Power, Adhesion,Strong Waterproof And Moisture-Proof, Excellent Resistance To Mold And Alkali Resistance.It Has A Super Decorative Effect And Long Service Life.


Product Detail

Product Tags

Practical Coverage: 900-100 Square Meter / 10kgs
Gloss:Matt Gloss
Surface Dry: Thirty~Fifty (30~50) Minutes.
Overcoating Interval: Allow Thirty~Fifty(30~50)Minutes Before Recoating.
Dry Through: Five(5) Days
Dry Film Thickness: 0.2-0.3mm/Coat
Application Method: Paint Brush, Roller Or Airless Spray.
Packaging: 5kgs/Bag,2bags/Bucket
Thinning: The Ratio Of Powder To Water Is 1:1.4 ~ 1:1.6.
Available Colors: There Are 9 Basic Colors, Can Use These 9 Basic Colors With Different Formula To Get Any Color You Want.

Description:
Multifunction Exterior Wall Dry Powder Paint Use International Innovative Formula,No Pollution To Indoor And Outdoor Environment. This Product Has Good Hiding Power, Adhesion,Strong Waterproof And Moisture-Proof, Excellent Resistance To Mold And Alkali Resistance.It Has A Super Decorative Effect And Long Service Life.

3

 

 

dffg (2)

Application:
It Is Suitable For The Decoration And Protection Of Concrete, Concrete Wall, Masonry Structure Of Various Buildings, As Well As The Renovation And Finishing Of Old Buildings.

ea

 

 

ed

Instructions For Use:
①Add Water To The 2-3cm Below The Water Level Of Inner Wall Of The Barrel.
②Pour 2 Bags Of Powder, Natural Precipitation For One Minute.
③Stir At High Speed With An Electric Mixer For At Least 8 Minutes.
④Scrape Off The Floating Material With The Whisk Head And Stir For 2 To 3 Minutes.
⑤Then Add Water Until About 10 ~ 15 Cm From The Top Of The Barrel.Use A Whisk Again For About 30 Seconds.Add Water To 1.5-2cm Above The Top Edge Of The Barrel(If Use Airless Spray, Add Water To The Groove On The Top Edge Of The Barrel, The Ratio Of Powder To Water Is 1:1.4 )
⑥Leave It For 30 Minutes(Leave It For 1~2 Hours Is Better)
⑦Gently Stir With A Stick Or A Blender, And Then Filter With A Specially Equipped Filter Screen For 2 Or 3 Times, Then You Can Use It.


  • Previous:
  • Next:

  • Write your message here and send it to us