The Flooring Expert

High Frequency Wooden Board Jointing Machine

Short Description:


Product Detail

Product Tags

High frequency board jointing machine combines high frequency heating with 2 direction pressure. it is widely used in finger joint laminated board jointing, glue board jointing, solid wood jointing and L-type door casing jointing, etc.It can finish one pcs board jointing within 2-3 minutes, compare with other heating methods, the high frequency heating is much effective.

Model

SW-45-PB

SW-58-PB

SW-48-PB

SW-110-PB

HF Power

20KW

30KW

40KW

40KW

Frequency

6.78mhz

6.78mhz

6.78mhz

6.78mhz

Workbench size

2500×1300mm

2500×1300mm

3200×1300mm

6000×1300mm

Splicing thickness

8-50mm

8-80mm

8-50mm

8-50mm

Upper pressure

20T

20T

20T

50T

Back pressure

36T

38T

48T

60T

Feeding Type

Conveyor belt/roller

Conveyor belt/roller

Conveyor belt/roller

Conveyor belt/roller

Advantages of high frequency board jointing machine;

1.Effective Heating.As a fast joining method,HF edge glue applies high frequency dielectric field to act on glue or water molecule selectively.The heat is produced from the friction of polar molecule,and the wood itself is not absorbing power.
2.Perfect Joining.With vertical hydraulic pressure,the joining result is high quality flatness.The horizontal pressure is fixed based on wood board density and thickness,ensure effective gluing result.
3. Insecticidal Sterilization.The water and protein of the ovum are also absorbing HF. Warms and eggs is killed under HF.
4.No bending and uniform humidity. The glue is curing quickly when the hydraulic cylinder is pressing.At the same time,the wood board,where the humidity is higher,is also heated by HF,realize uniform humidity after joining.And the wood board will maintain a good quality flatness for a long time.

5.The vertical lifting is adopted for the upper pressure, and the rack and pinion guide pillar mechanism is added. The flatness is better than the ordinary table oblique lifting high-frequency panel splicing machine, and the plane thickness can be saved by 0.3mm,
If splicing thickness 18mm board, calculated according to 160 pcs per day and every year according to 300 days, then
you can save raw materials =1.22 x 2.44 x 0.0003 x 160 x 300=42.86 cubic meters, calculated according to USD 800/cubic meter of finished boards, you can save the cost of USD 34280 per year.


  • Previous:
  • Next:

  • Write your message here and send it to us