The Flooring Expert

The product adopts hydrophobic media and microcapsule slow-release technology to make it difficult for moisture to enter walls. It can slowly release the anti-mold effect and avoid early paint loss and failure, thus keeping walls free of water marks, yellow marks, mold and other problems caused by a humid environment. At the same time, featuring a water-resistant and breathable membrane, the paint can withstand moisture and dew. With a variety of functions such as high-hiding power, high scrubbing resistance, strong alkali resistance, the product can provide a better wall protection effect and is more in line with the needs of people.

Product use: It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes, especially suitable for interior wall coating in low-rise mold-prone rooms. 

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

No additives

Outstanding Features, Superior Performance

Strong resistance to moisture, water and air permeability, rainstains and condensation

Innovative microcapsule slow-release technology, which can produce long-term anti-mold effect, effectively resist the invasion of 9 kinds of mold, and reach the 0-class anti-mold standard

One-Package Solution to Wall Problems

High scrub resistance

Excellent hiding power

Strong resistance to alkali

Can be made into light colors

Efficient resistance to mold

Endurable brightness

No additives: Free of formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene).

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with an appropriate amount of clean water (until reaching the appropriate application viscosity).

Theoretical paint consumption: 12-14m²/L/round (rolling) (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days/25℃, which may be duly extended under low-temperature (not less than 5℃), high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) – primer (360 Multi-Effect Mouldproof Allround Primer) – apply 1 round – topcoat (High Performance & High Moistureproof Wall Paint) – apply 2 rounds

Tool Cleaning:

After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.
   

2. Refer to the product label for production date, batch number and expiration date.

3. For product application tips, please refer to the safety label on product packaging.