The Flooring Expert

The 3TREES High-Performance & Scrub-Resistant Wall Paint adopts an innovative toughening formula. Micron-level needle-like materials are added to the product. Once a paint film is formed, the needle-like materials will cross one another to forming a mesh structure, thus improving film compactness and tensile strength in all directions and substantially increasing film flexibility. This product can resist 100,000+ scrub times and keep the wall surface clean as new. Odorless and free from added formaldehyde and benzene substances, it can create a healthy home environment for you.

It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

No additives

Outstanding Features, Superior Performance

Resistance to 100,000+ scrub times thanks to innovative toughening technology

One-Package Solution to Wall Problems

High scrub resistance

Excellent hiding power

Strong resistance to alkali

Can be made into light colors

Doubled anti-mold effect

Endurable brightness

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12-14m2/L/round (rolling) (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, hard drying 2 hours, and recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions)

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) – primer (3TREES Odorless Primer) – apply 1 round – topcoat (High-Performance & Scrub-Resistant Wall Paint) – apply 2 rounds

Tool cleaning: After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.
   

2. Refer to the product label for production date, batch number and expiration date.

3. For product application tips, please refer to the safety label on product packaging.