The Flooring Expert
Horizontal Storage Tank Lined With PTFE Sheet For Chemical Processing Made In China
Product Description
Advantages And Characteristics In The Design Of Steel Lined Tetrafluoride Pipe Fittings
This RANA is made of high performance ptfe powder, throgh tube is pushed (squeezed) and molded, chemical tube surface is treated, and then discharged into seamless steel tube (outer diameter of liner compared to inner diameter of steel tube 1-1.5 mm) expansion tight lining.
The product has three characteristics：
1. Seamless pipe, high performance impact resistance, anti aging.
2. Axial tensile strength is very good.
3. The surface of the product is smooth, and each special-shaped steel piece can be lined.
Basic Info
|
Model NO.
|
FF-9979
|
|
Connection Type
|
Seamless
|
|
Specification
|
various
|
|
Origin
|
Jiangsu China
|
|
Production Capacity
|
5000000
|
|
Cross-Section Shape
|
Round
|
|
Transport Package
|
Welded Steel Shelf
|
|
Trademark
|
Yihao
|
|
HS Code
|
3904610000
|
Product Parameters
Teel Pipe Lined PTFE for Pipe Fittings
Steel pipes are lined with teflon fittings
Brand: Yihao
Material: PTFE，CS/SS STEEL
DN: 3/4 “- DN500, 3/4″ ~ 20″
Operating temperature :-20ºC ~ 180ºC
Working pressure :0 ~ 2.5mpa
Flange: according to HG/T20592-2009)
** Can be selected with HG, GB, JB, ANSI, JIS, BS, DIN and other standards, can be selected with fixed flanges, flexible flanges.
Medium: can support the transport of arbitrary concentration of strong acid, strong alkali, organic solvent, strong oxidant, toxic and other corrosive media.
Note:
1) When the diameter of the product DN≥500mm, it belongs to the equipment class.
2) If it is used under negative pressure, the demand should be explained to us when ordering, and then lining according to negative pressure resistance process.
3) If there is no special requirement for flanges, please refer to the appendix as stipulated in HG20592-2009.
4) See table for common pipe fitting parameters. Other non-standard parts, such as eccentric reducer, reducing elbow, etc., we can be customized according to user requirements, processing.
5) The pressure of steel-lined F4 and F46 glass cylinder mirrors is < 0.3mpa, and the pressure in working condition is ≥ 0.3mpa. Customers suggest using steel-lined PTFE four-way mirrors.
6) Steel lined PTFE molding parts DN≥200, the use of temperature <120℃, the use of pressure -0.02-1.6mpa, can be specially designed according to customer conditions.
WHY CHOOSE US
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..