The Flooring Expert
Housing Customized Flat Pack Housing with Glass Window
Structure of the flat packed housing
The flat packed housing is composed of top frame components, bottom frame components, columns and several interchangeable wall panels. Using modular design concepts and production technology, modularize a house into standard parts and assemble the house on the construction site.
BOTTOM FRAME SYSTEM
Main beam:3.5mm SGC340 galvanized cold-rolled steel profile; more thicker than top frame main beam
Sub-beam:9pcs “π” typed Q345B, spec.:120*2.0
Bottom sealing plate:0.3mm steel
Cement fiber board:20mm thick, green and environmental protection, density ≥1.5g/cm³, A-grade non-combustible.Compared with the traditional glass magnesium board and Osong board, the cement fiber board is more strenger and does not deform when exposed to water.
PVC floor:2.0mm thick, B1 class flame retardant
Insulation(optional):Moisture-proof plastic film
Base External Plate:0.3mm Zn-Al coated board
TOP FRAME SYSTEM
Main beam:3.0mm SGC340 galvanized cold-rolled steel profile
Sub-beam: 7pcs Q345B galvanizing steel, spec. C100x40x12x1.5mm, the space between sub-beams is 755m
Drainage :4pcs 77x42mm, connected with four 50mm PVC downspouts
Outer roof panel:0.5mm thick aluminum zinc color steel plate, PE coating, aluminum zinc content ≥40g/㎡. Strong anticorrosion, 20 years guaranteed life
Self – locking ceiling plate:0.5mm thick aluminum-zinc color steel plate, PE coating, aluminum-zinc content ≥40g/㎡
Insulation layer:100mm thick glass fiber wool felt with aluminum foil on one side, bulk density ≥14kg/m³, class A non-combustible
CORNER POST&COLUMN SYSTEM
Corner column: 4pcs,3.0mm SGC440 galvanized cold rolled steel profile,the columns are connected with top & bottom frame with Hexagon head bolts (strength: 8.8),the insulation block should be filled in after installed columns
Corner post: 4mm thick square pass, 210mm*150mm, integral molding. Welding method: Robot welding, precise and efficient. Galvanized after pickling to increase paint adhesion and prevent rust
Insulating tapes: among the junctions of the corner post and the wall panels to prevent the effect of cold and heat bridges and improve the performance of heat preservation and energy saving
WALL PANEL SYSTEM
Outer board: 0.5mm thick galvanized color steel plate, aluminum plated The zinc content is ≥40g/㎡, which guarantees anti-fading and anti-rust for 20 years
Insulation layer: 50-120mm thick hydrophobic basalt wool (environmental protection), density ≥100kg/m³, class A non-combustible Inner board: 0.5mm Alu-zinc colorful steel plate, PE coating
Binding: The upper and lower ends of the wall panels are sealed with galvanized edging (0.6mm galvanized sheet).There are 2 M8 screws embedded in the top, which are locked and fixed with the groove of the main beam through the side plate pressing piece
| Model | Spec. | House outer size(mm) | House inner size (mm) | Weight(KG) | |||||
| L | W | H/packed | H/assembled | L | W | H/assembled | |||
| Type GFlat packed housing | 2435mm standard house | 6055 | 2435 | 660 | 2896 | 5845 | 2225 | 2590 | 2060 |
| 2990mm standard house | 6055 | 2990 | 660 | 2896 | 5845 | 2780 | 2590 | 2145 | |
| 2435mm corridor house | 5995 | 2435 | 380 | 2896 | 5785 | 2225 | 2590 | 1960 | |
| 1930mm corridor house | 6055 | 1930 | 380 | 2896 | 5785 | 1720 | 2590 | 1835 | |
2435mm standard house
2990mm standard house
2435mm corridor house
1930mm corridor house
Features of housing flat packed container house
❈ Good drainage performance
Drainage ditch:Four PVC downpipes with a diameter of 50mm are connected inside the top frame assembly to meet the drainage needs. Calculated according to the heavy rain level (250mm precipitation), the sinking time is 19min, the top frame sinking speed is 0.05L/S. The drainage pipe displacement is 3.76L/S, and the drainage speed is much higher than the sinking speed.
❈ Good sealing performance
Top frame sealing treatment of unit house: 360-degree lap joint outer roof panel to prevent rainwater from entering the room from the roof. The joints of doors / windows and wall panels are sealed with sealant top frame sealing treatment of combined houses: sealing with sealing strip and butyl glue, and decorating with steel decoration fiting . column sealing treatment of combined houses:sealing with sealing strip and decorating with steel decoration fiting . S-type plug interface on wall panels to enhance the sealing performance.
❈ Anti-corrosion performance
housing group is the first manufacturer to apply graphene electrostatic spraying process to flat packed container house. The polished structural parts enter the spraying workshop, and the powder is evenly sprayed on the surface of the structure. After heating at 200 degrees for 1 hour, the powder is melted and attached to the surface of the structure. The spray shop can accommodate 19 sets of top frame or bottom frame processing at a time. Preservative can last up to 20 years.
Supporting facilities of container camp
Complete supporting facilities
Application scenario
Can design according to different requirements, engineering camp, military camp, resettlement house, schools, mining camp, commercial house(coffee, hall), tourism occupancy house (beach, grassland) and so on.
R&D of Housing Group
The R&D company is responsible for various design-related work of the Housing group, including new product development, product upgrade, scheme design, construction drawing design, budget, technical guidance, etc.
Continuous improvement and innovation in the promotion and application of prefabricated buildin, to meet the diversified requirements of different customers in the market, and to ensure the continuous competitiveness of the housing’s products in the market.
Installation of Housing Group
Xiamen Housing Construction Labor Service Co., Ltd. is a professional installation engineering company under Housing Group. which mainly engaged in the installation, dismantling, repair and maintenance of prefabricated K & KZ & T house and container houses, there are seven installation service centers in East China, South China, West China, North China, Central China, Northeast China and International, with more than 560 professional installation workers, and we has successfully delivered more than 3000 engineering projects to customers.
Brife of housing group
Housing group was established in 2001 withintegrating prefabricated building design, production, sales and construction.
housing group owns Beijing (Tianjin production base), Jianu (Chanhu production base),Guangdong(Foshan production base), Sichuan (Ziyang production base), Liaozhong (Shenyang production base), International and Supply Chain Companines.
housing group is committed to the R&D and production of the prefabricated buildin: flat packed container houses, prefab KZ house, prefeb K&T house, steel structure, which are widely used in various scenarios, such as engineering camps, military camps,temporary municipal houses,tourism and vacation, commercial houses, education houses, and resettlement houses in disaster areas…
WHY CHOOSE US
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..