China Industrial Compressd Air Modular Desiccant Air Dryer Manufacturer and Supplier

Industrial Compressd Air Modular Desiccant Air Dryer

Short Description:

Modular adsorption dryer, also known as modular adsorption dryer, referred to as modular suction dryer. Suction dryer is used to dry compressed air, modular design will be the original large volume, heavy equipment to improve the small volume, light weight, if the later need to expand the equipment, there is no need to replace the whole set, can directly increase the module in the equipment supplier, simple and convenient, can be installed in the factory room. The traditional twin-tower suction dryer wastes a lot of energy, while the modular suction dryer solves this problem with an internal dew point meter and ES energy saving function.

Send email to us

Product Detail

Product Tags

PDF Download

Catalog for modular dryer2

Product Paramters

SPD series Modular air dryer
Model	Capacity(m³/min)	Connection size	L(mm)	W(mm)	H(mm)	Weight(Kg)
SPD-016	1.6	G1	325	240	790	37
SPD-026	2.5	G1	325	240	1090	50
SPD-035	3.5	G1	325	240	1390	62
SPD-070	7	G1-1/2	615	445	1600	155
SPD-105	10.5	G2	777	445	1600	212
SPD-140	14	G2-1/2	939	445	1600	270
SPD-175	17.5	G2-1/2	1101	445	1600	325
SPD-210	21	G2-1/2	1263	445	1600	385
SPD-245	24.5	G2-1/2	1425	445	1600	440
SPD-280	28	DN80	1587	445	1600	500
SPD-350	35	DN80	1101	445	1600	670
SPD-420	42	DN100	1263	445	1600	770
SPD-490	49	DN125	1425	445	1600	880
SPD-560	56	DN125	1587	445	1600	1000
SPD-630	63	DN150	1263	445	1600	1155
SPD-735	73.5	DN150	1425	445	1600	1320
SPD-840	84	DN150	1587	445	1600	1500

Advantages

First, the length to diameter ratio of the adsorption cylinder of the modular drying machine is large. Compressed air and adsorbent contact uniform enough, adsorbent utilization efficiency is high;

Second, ultra-high linear speed of empty tower. According to the adsorption kinetics theory and the actual test, the higher the line velocity of the empty column, the faster the mass transfer velocity, the better the dew point of the same contact time;

Third, shorten the switching cycle. The cycle of the modular drying machine is generally 4-6 minutes, while the cycle of the traditional twin-tower non-thermal drying machine is 10 minutes. The shorter the period is, the less water component is actually absorbed, and the drier compressed air is obtained.

Fourth, improve the regeneration gas, get better regeneration effect. In order to achieve better performance in shorter contact time, the modular drying machine needs more regeneration than the twin tower no heat drying machine to achieve better regeneration effect.