45°,90°AND 180°CARBON STEEL ELBOW
Standard: ASME/ANSI B16.9 / ASTM A235
Grade: WPB; WPC
45°Elbow
90°Elbow
180°Elbow
Outside Diameter | Wall Thickness (mm) |
Theoretical Weight | |||
45° | 90° | 180° | |||
INCH | MM | SCH40 | KG | KG | KG |
1/2 | 21.3 | 2.77 | 0.04 | 0.08 | 0.16 |
3/4 | 26.7 | 2.87 | 0.05 | 0.1 | 0.21 |
1 | 33.4 | 3.38 | 0.08 | 0.16 | 0.3 |
1 1/4 | 42.2 | 3.56 | 0.13 | 0.25 | 0.5 |
1 1/2 | 48.3 | 3.68 | 0.18 | 0.38 | 0.72 |
2 | 60.3 | 3.91 | 0.38 | 0.65 | 1.3 |
2 1/2 | 73.0 | 5.16 | 0.65 | 1.29 | 2.58 |
3 | 88.9 | 5.49 | 1.02 | 2.03 | 4.06 |
3 1/2 | 101.6 | 5.74 | 1.22 | 2.45 | 4.87 |
4 | 114.3 | 6.02 | 1.93 | 3.85 | 7.1 |
5 | 141.3 | 6.55 | 3.26 | 6.51 | 13.6 |
6 | 168.3 | 7.11 | 6.06 | 10.1 | 20.2 |
8 | 219.1 | 8.18 | 7.96 | 18.9 | 21.8 |
10 | 273.1 | 9.27 | 12.5 | 25 | 50 |
12 | 323.9 | 9.53 | 38.6 | 66.1 | 108 |
14 | 355.6 | 9.53 | 34.1 | 68.1 | 136 |
16 | 406.4 | 9.53 | 44.7 | 39.3 | 179 |
18 | 457.2 | 9.53 | 56.5 | 113 | 226 |
20 | 508 | 9.53 | 70 | 140 | 230 |
22 | 558.8 | 9.53 | 77 | 170 | 340 |
24 | 609.6 | 9.53 | 101 | 202 | 404 |
26 | 660.4 | 9.53 | 119 | 238 | 476 |
STRAIGHT AND REDUCER TEE
Standard: ASME/ANSI B16.9 / ASTM A234
Grade: WPB; WPC
Straight Tee
Reducer Tee
Outside Diameter | Outside Diameter | ||
INCH | MM | INCH | MM |
3/4×3/4 | 26.7×26.7 | 6×6 | 168.3×168.3 |
3/4×1/2 | 26.7×21.3 | 6×5 | 168.3×141.3 |
1×1 | 33.4×33.4 | 8×8 | 219.1×219.1 |
1×3/4 | 33.4×26.7 | 8×6 | 219.1×168.3 |
1 1/4×1 1/4 | 42.2×42.2 | 10×8 | 273×219.1 |
1 1/4×1 | 42.2×33.4 | 10×10 | 273.1×273.1 |
1 1/2×1 1/2 | 48.3×48.3 | 12×12 | 323.8×323.8 |
1 1/2×1 1/4 | 48.3*42.2 | 12×10 | 323.8×273.1 |
2×2 | 60.3zx60.3 | 14×14 | 355.6×355.6 |
2×1 1/2 | 60.3×48.3 | 14×12 | 355.6×323.8 |
3×3 | 88.9×88.9 | 18×18 | 457×457 |
3×2 1/2 | 88.9×73 | 18×16 | 457×406.4 |
4×4 | 114.3×114.3 | 20×20 | 508×508 |
4×3 | 114.3×88.9 | 20×18 | 508×457 |
5×5 | 141.3×141.3 | 24×24 | 610×610 |
5×4 | 141.3×114.3 | 24×20 | 610×508 |
CONCENTRIC AND ECCENTRIC REDUCER
Standard: ASME/ANSI B16.9 / ASTM A234
Grade: WPB; WPC
CON Reducer
ECC Reducer
Outside Diameter | Outside Diameter | ||
INCH | MM | INCH | MM |
3/4×1/2 | 26.7×21.3 | 5×3 | 141.3×88.9 |
1X3/4 | 33.4X26.7 | 6×5 | 168.3×141.3 |
1×1/2 | 33.4×21.3 | 6×4 | 168.3×114.3 |
1 1/4×1 | 42.2×33.4 | 8×6 | 219.1×168.3 |
1 1/4×3/4 | 42.2×26.7 | 8×4 | 219.1×114.3 |
1 1/2×1 1/4 | 48.3*42.2 | 10×8 | 273.1×219.1 |
1 1/2×1 | 48.3×33.4 | 10×6 | 273.1×168.3 |
2×1 1/2 | 60.3×48.3 | 12×10 | 323.9×273.1 |
2×1 | 60.3zx33.4 | 12×8 | 323.9×219.1 |
2 1/2×2 | 73×60.3 | 14×12 | 355.6×323.8 |
2 1/2×1 1/2 | 73×48.3 | 14×10 | 355.6×273.1 |
3×2 1/2 | 88.9×73 | 18×16 | 457×406.4 |
3×2 | 88.9×60.3 | 18×14 | 457×355.6 |
4×3 | 114.3×88.9 | 20×18 | 508×457 |
4×2 1/2 | 114.3×73 | 24×20 | 610×508 |
5×4 | 141.3×114.3 | 24×18 | 610×457 |
Standard: ENGB/T-3287 ; BS EN-10242; KHT300-6 etc.
Material: Malleable Iron
Surface: Galvanized or Natural Black
Inner Surface: With or Without PVC Coated
Bushing
SIZE | In | 3/8*1/4 | 1/2*1/4 | 1/2*3/8 | 3/4*3/8 | 3/4*1/2 | 1*1/2 |
mm | 10×8 | 18×8 | 15×10 | 20×10 | 20×15 | ||
L | 18.5 | 22.5 | 22.5 | 24.5 | 24.5 | 28 | |
H | 6 | 6 | 6 | 6 | 6 | 6 | |
S | 18.4 | 22 | 22 | 29.6 | 29.6 | 37.4 |
Union
SIZE | In | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 |
mm | 15 | 20 | 25 | 32 | 40 | 50 | |
L | 46 | 50 | 56 | 63 | 68 | 76 | |
SIZE | In | 2 1/2 | 3 | 4 | |||
mm | 65 | 80 | 100 | ||||
L | 83 | 93 | 113.5 |
Straight Tee
SIZE | In | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
A | 20 | 24 | 27 | 32 | 37 | 44.5 | |
SIZE | In | 1 1/2 | 2 | 2 1/2 | 3 | 4 | 6 |
mm | 40 | 50 | 65 | 80 | 100 | 150 | |
A | 48.5 | 57 | 68.5 | 77.5 | 96.5 | 129 |
Coupling
SIZE | In | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
L | 26 | 29 | 35 | 38 | 44 | 49 | |
SIZE | In | 1 1/2 | 2 | 2 1/2 | 3 | 4 | 6 |
mm | 40 | 50 | 65 | 80 | 100 | 150 | |
L | 53 | 63 | 72 | 77 | 91 | 118 |
Reducering Socket
Size | mm | 10×8 | 15×8 | 15×10 | 20×15 | 25×10 | 25×15 |
In | 3/8×1/4 | 1/2×1/4 | 1/2×3/8 | 3/4×1/2 | 1×3/8 | 1×1/2 | |
A | 29 | 35 | 36 | 38 | 44 | 44 | |
Size | mm | 32×15 | 32×20 | 32×25 | 40×15 | 40×20 | 40×25 |
In | 1¼x1/2 | 1¼x3/4 | 1¼ x1 | 1½x1/2 | 1 ½x 3/ 4 | 1½ x1 | |
A | 49 | 49 | 49 | 53 | 53 | 53 | |
Size | mm | 40×32 | 50×15 | 50×20 | 50×25 | 50×32 | 50×40 |
In | 1½x1¼ | 2 x1/2 | 2×3/4 | 2×1 | 2×1¼ | 2×1½ | |
A | 53 | 63 | 63 | 63 | 63 | 63 | |
Size | mm | 65×15 | 65 x 20 | 65×25 | 65×32 | 65×40 | 65×50 |
In | 2½x1/2 | 2 ½x3/4 | 2 1/2×2 | 2½ x1¼ | 2 ½x1½ | 2 ½ x2 | |
A | 72 | 72 | 72 | 72 | 72 | 72 | |
Size | mm | 80×15 | 80x 20 | 80×25 | 80×32 | 80×40 | 80×50 |
In | 3 x 1/2 | 3×3/4 | 3×1 | 3×1¼ | 3×1½ | 3×2 | |
A | 71 | 71 | 71 | 71 | 71 | 71 | |
Size | mm | 80×65 | 100 x15 | 100×20 | 100 x 25 | 100×32 | 100×40 |
In | 3×2½ | 4×1/2 | 4×3/4 | 4×1 | 4×1¼ | 4x 1½ | |
A | 71 | 84 | 84 | 84 | 84 | 84 | |
Size | mm | 100×50 | 100x 65 | 100×80 | 25×20 | ||
In | 4×2 | 4×2½ | 4×3 | 1×3/4 | |||
A | 84 | 84 | 84 | 44 |
Octagonal Cap
Size | In | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 |
mm | 10 | 15 | 20 | 25 | 32 | 40 | |
A | 17 | 19 | 22 | 24 | 27 | 28 | |
S | 20.6 | 24.6 | 30.4 | 37.2 | 47 | 53 | |
Size | In | 2 | |||||
mm | 50 | ||||||
A | 32 | ||||||
S | 65 |
Plain Plug
Size | In | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1¼ |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
L | 15.5 | 17 | 22.5 | 24 | 27 | 30 | |
B | 1 0 | 10 | 13 | 14 | 16 5 | 20 | |
S | 6 | 7 | 10 | 12 | 15 | 18 | |
Size | In | 1½ | 2 | 2½ | 3 | 4 | |
mm | 40 | 50 | 65 | 80 | 100 | ||
L | 31 | 36 | 40.5 | 45.5 | 51 | ||
B | 21 | 25 | 26 5 | 29.5 | |||
s | 22 | 26 | 30 | 34 | 44 |
Barrel Nipple
Size | In | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
L | 36 | 36 | 44 | 47 | 53 | 56 | |
S | 16.7 | 19.2 | 23.6 | 29.2 | 36 | 45 | |
Size | In | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
mm | 40 | 50 | 65 | 80 | 100 | ||
L | 58 | 68 | 73 | 81 | 95 | ||
S | 63 | 63 | 79.4 | 91.6 | 117 |
90 Elbow
Size | I n | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1¼ |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
A | 20 | 24 | 27 | 32 | 37 | 44 .5 | |
Size | In | 1½ | 2 | 2Y. | 3 | 4 | 6 |
mm | 40 | 50 | 65 | 80 | 10 0 | 150 | |
A | 48 .5 | 57 | 68 .5 | 77.5 | 96.5 | 129 |
45 Elbow
Size | In | 1/2 | 3/4 | 1 | 1¼ | 1½ | 2 |
mm | 15 | 20 | 25 | 32 | 40 | 50 | |
A | 22 | 25 | 28 | 33 | 36 | 43 | |
Size | In | 2½ | 3 | 4 | 6 | ||
mm | 65 | 80 | 100 | 150 | |||
A | 48 .5 | 53 . 5 | 64 . 5 | 129 |
Reducing Elbow
Size | In | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1¼ |
mm | 8 | 10 | 15 | 20 | 25 | 32 | |
A | 20 | 25 | 28 | 33 | 38 | 45 | |
B | 28 | 33 | 38 | 44 | 52 | 60 | |
Size | In | 1½ | 2 | 2½ | 3 | 4 | |
mm | 40 | 50 | 65 | 80 | 100 | ||
A | 50 | 58 | 69 | 77 .5 | 96.5 | ||
B | 65 | 74 | 90 | 100 | 120 |
Reducing Tee
Size | In | 1.25×1/2×1 | 1 1/4×3/4×1 | 1 1/4x1x1 | 11/2×1/2×1 1/4 | 1 1/2×3/4×1 1/4 | 1 1/2x1x1 |
mm | 32x15x25 | 32x20x25 | 32x25x25 | 40x15x32 | 40x20x32 | 40x25x25 | |
A | 34 | 36 | 39 | 35 | 37 | 40 | |
B | 37 | 40 | 40 | 41 | 43 | 44 | |
C | 31 | 34 | 36 | 34 | 36 | 36 | |
Size | In | 1 1/2x1x1 1/4 | 1 1/2×1 1/4×1 | 1 1/2×1 1/4×1 1/4 | 2×1/2×1 1/2 | 2×3/4×1 1/2 | 2x1x1 14 |
mm | 40x25x32 | 40x32x25 | 40x32x32 | 50x15x40 | 50x20x40 | 50x25x32 | |
A | 41 | 45 | 45 | 37 | 40 | 43 | |
B | 45 | 47 | 47 | 47 | 49 | 51 | |
C | 40 | 41 | 44.5 | 35 | 37 | 40 | |
Size | In | 2x1x1 1/2 | 2×1 1/4×1 1/4 | 2×1 1/4×1 1/2 | 2×1/2×1 | 2×1 1/2×1 1/2 | 2 1/2×3/4×2 |
mm | 50x25x40 | 50x32x32 | 50x32x40 | 50x40x25 | 50×40/40 | 65×20/50 | |
A | 42 | 47 | 47 | 51 | 51 | 43.5 | |
B | 49 | 53 | 53 | 54 | 54 | 57 | |
C | 40 | 44.5 | 45 | 45 | 48.5 | 40 | |
Size | In | 2 1/2x1x2 | 2×1 1/4×1 1/2 | 2 1/2×1 1/4×2 | 2 1/2×1 1/2×2 | 2 1/2x2x2 | 3x1x2 1/2 |
mm | 65x25x50 | 65x32x40 | 65x32x50 | 65x40x50 | 65x50x50 | 80x25x65 | |
A | 45 | 51.5 | 51.5 | 54.5 | 59.5 | 49.5 | |
B | 58 | 61 | 61 | 61 | 64 | 67 | |
C | 42 | 45 | 47 | 51 | 57 | 47.5 | |
Size | In | 3×1 1/4×2 1/2 | 3×1 1/2×2 1/2 | 3x2x2 1/2 | 3×2 1/2×2 1/2 | ||
mm | 80x32x65 | 80x40x65 | 80×50/65 | 80×40 x65 | |||
A | 54.5 | 57.5 | 61.5 | 61.5 | |||
B | 69 | 71 | 71 | 71 | |||
C | 51.5 | 54.5 | 59.5 | 59.5 |
Standard: ANSI B36.10, JIS B2302,ASME/ANSI/BS1560/DIN2616 etc.
Steel grade: GR.A GR.B
Surface: Red Painted or Blue Painted or Silver Painted
MECHANICAL CROSS (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
100×50(4×2) | 114.3×60.3 |
100×65 (4×2-1/2) | 114.3×73 |
100×65(4×2-1/2) | 114.3×76. 1 |
100×80(4×3) | 114.3×88.9 |
125×65(5×2-1/2) | 139.7×76. 1 |
125×80(5×3) | 139.7×88.9 |
150×65(6×2-1/2) | 165.1x 76. 1 |
150×80(6×3) | 165.1×88.9 |
150×100(6×4) | 165.1×114.3 |
200×65(8×2-1/2) | 219.1×76.1 |
200×80(8×3) | 219.1×88.9 |
200×100(8×4) | 219.1×114.3 |
MECHANICAL CROSS (THREADED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
50×25(2×1) | 60.3xRcl |
65×25(2-1/2×1) | 76. lxRcl |
65×40(2-1/2×1-1/2) | 76. lxRcl-1/2 |
80×25(3×1) | 88.9xRcl |
80×50(3×2) | 88.9xRc2 |
100×25(4×1) | 108xRcl |
100×65 (4×2-1/2) | 114.3xRc2-1/2 |
125×25(5×1) | 133xRcl |
125×80(5×3) | 133xRc3 |
125×25(5×1) | 139.7xRcl |
150×25(6×1) | 159xRcl |
150×80(6×3) | 165. 1xRc3 |
200×25(8×1) | 219. lxRcl |
200×80(8×3) | 219. 1xRc3 |
MECHANICAL TEE (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
100×50(4×2) | 114,3×60.3 |
100×80(4×3) | 114.3×88.9 |
125×65(5×2-1/2) | 139.7×76.1 |
125×80(5×3) | 139.7×88.9 |
150×65 (6×2-1/2) | 165.1×76.1 |
150×100 (6×4) | 165.1×114.3 |
200×65(8×2-1/2) | 219.1×76.1 |
200×100(8×4) | 219.1×114.3 |
MECHANICAL TEE (THREADED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
50×25(2×1) | 60.3xRcl |
65×25(2-1/2×1) | 76. lxRcl |
65×40(2-1/2×1-1/2) | 76. lxRcl-1/2 |
80×25(3×1) | 88.9xRcl |
80×50(3×2) | 88.9xRc2 |
100×25(4×1) | 108xRcl |
100×65(4×2-1/2) | 108xRc2-1/2 |
100×25(4×1) | 114.3xRcl |
100×65 (4×2-1/2) | 114.3xRc2-1/2 |
125×25(5×1) | 133xRcl |
125×80(5×3) | 133xRc3 |
125×25(5×1) | 139.7xRcl |
REDUCING TEE (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
65×50(2/1/2×2) | 76.1×60.3 |
80×65(3×2-1/2) | 88.9×76.1 |
100×50(4×2-1/2) | 108×76.1 |
100×50(4×2) | 114.3×60.3 |
100×80(4×3) | 114.3×88.9 |
125×100(5×4) | 133×108 |
125×65(5×2-1/2) | 139.7×76.1 |
125×100 (5×4) | 139.7×114.3 |
150×100(6×4) | 159×108 |
150×125(6×5) | 159×133 |
150×65 (6×2-1/2) | 165.1x 76. 1 |
150×125(6×5) | 165.1×139.7 |
200×50(8×2) | 219.1×60.3 |
200×150(8×6) | 219.1×165.1 |
TEE (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
50(2) | 60.3 |
65(2-1/2) | 76.1 |
80(3) | 88.9 |
100⑷ | 108 |
100⑷ | 114.3 |
125(5) | 133 |
125(5) | 139.7 |
150⑹ | 159 |
150(6) | 165.1 |
150⑹ | 168.3 |
200⑻ | 219.1 |
REDUCING CROSS (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
100×65(4×2-1/2) | 114.3×76 |
100×80(4×3) | 114.3×88.9 |
125×65(5×2-1/2) | 139.7×76 |
125×100(5×4) | 139.7×114.3 |
150×65(6×2-1/2) | 165.1×76 |
150×125(6×5) | 165.1×139. 7 |
200×100(8×4) | 219.1×114.3 |
200×150(8×6) | 219.1×165.1 |
CROSS (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
65(2-1/2) | 76.1 |
80⑶ | 88.9 |
100⑷ | 114.3 |
125⑸ | 139.7 |
150(6) | 165 |
200⑻ | 219.1 |
45° Elbow
22.5° Elbow
90° Elbow
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
50⑵ | 60.3 |
65(2-1/2) | 76.1 |
80⑶ | 88.9 |
100⑷ | 108 |
100⑷ | 114.3 |
125⑸ | 133 |
125(5) | 139.7 |
150⑹ | 159 |
150⑹ | 165 |
200⑻ | 219.1 |
REDUCER (THREADED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
50×20(2×3/4) | 60.3xRc3/4 |
50×40 (2×1-1/2) | 60.3xRcl-1/2 |
65×25(2-1/2×1) | 76. lxRcl |
65 x 50 (2-1/2 x 2) | 76. 1xRc2 |
80×25(3×1) | 88.9xRcl |
80×65(3×2-1/2) | 88.9xRc2-1/2 |
100×25(4×1) | 108xRcl |
100×25(4×1) | 114.3xRcl |
125×25(5×1) | 133xRcl |
125×25(5×1) | 139.7xRcl |
150×25(6×1) | 159xRcl |
150×80(6×3) | 159xRc3 |
150×25(6×1) | 165. lxRcl |
150×80(6×3) | 165. 1xRc3 |
200×25(8xRcl) | 219. lxRcl |
200×80(8×3) | 219. 1xRc3 |
REDUCER (GROOVED)
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) |
65 x 50 (2-1/2 x 2) | 76.1×60.3 |
80×50(3×2) | 88.9×60.3 |
80×65(3×2-1/2) | 88.9×76.1 |
100×65(4×2-1/2) | 108×76.1 |
100×80(4×3) | 108×88.9 |
100×50(4×2) | 114.3×60.3 |
100×80(4×3) | 114.3×88.9 |
125×65(5×2-1/2) | 133×76.1 |
125×100(5×4) | 133×114.3 |
125×50(5×2) | 139.7×60.3 |
125×100(5×4) | 139.7×114.3 |
150×65(6×2-1/2) | 159×76.1 |
150×125(6×5) | 159×139.7 |
150×50(6×2) | 165.1×60.3 |
150×125(6×5) | 165.1×139.7 |
200×65(8×2) | 219.1×60.3 |
200×150(8×6) | 219.1×165.1 |
HEAVY DUTY FLANGE
(GROOVED)
NORMAL SIZE(mm/in) | OUTSIDE DIAMETER(mm) | WORKING PRESSURE(MPA) | DIMENSIONS(MM) | NO. OF HOLES | |||
A | B | c | D | ||||
65(2-1/2) | 76.1 | 2.5 | 63.5 | 17 | 185 | 145 | 8 |
65⑶ | 88.9 | 2.5 | 63.5 | 17 | 200 | 160 | 8 |
100⑷ | 108 | 2.5 | 67.5 | 16.5 | 235 | 190 | 8 |
100⑷ | 114.3 | 2.5 | 68 | 15 | 230 | 190 | 8 |
150⑹ | 159 | 2.5 | 68 | 17 | 300 | 250 | 8 |
150⑹ | 165.1 | 2.5 | 68 | 17 | 300 | 250 | 8 |
200⑻ | 219.1 | 2.5 | 77 | 20 | 360 | 310 | 12 |
ADAPTOR FLANGE
(GROOVED)
NORMAL SIZE(mm/in) | OUTSIDE DIAMETER(mm) | WORKING PRESSURE(MPA) | DIMENSIONS(MM) | NO. OF HOLES | |||
A | B | c | D | ||||
50⑵ | 60.3 | 1.6 | 50 | 15 | 160 | 125 | 4 |
65(2-1/2) | 76.1 | 1.6 | 50 | 15 | 178 | 145 | 4 |
80⑶ | 88.9 | 1.6 | 50 | 15 | 194 | 160 | 8 |
100⑷ | 108 | 1.6 | 55 | 15 | 213 | 180 | 8 |
100⑷ | 114.3 | 1.6 | 55 | 15 | 213 | 180 | 8 |
125⑸ | 133 | 1.6 | 58 | 17 | 243 | 210 | 8 |
125⑸ | 139.7 | 1.6 | 58 | 17 | 243 | 210 | 8 |
150⑹ | 159 | 1.6 | 65 | 17 | 280 | 240 | 8 |
150⑹ | 165.1 | 1.6 | 65 | 17 | 280 | 240 | 8 |
200⑻ | 219.1 | 1.6 | 78 | 19 | 340 | 295 | 812 |
BLIND FLANGE
NORMAL SIZE(mm/in) | OUTSIDE DIAMETER(mm) | WORKING PRESSURE(MPA) | HEIGHT(MM) | |
50⑵ | 60.3 | 2.5 | 28 | |
65(2-1/2) | 76.1 | 2.5 | 28 | |
80⑶ | 88.9 | 2.5 | 29 | |
100⑷ | 108 | 2.5 | 31 | |
100⑷ | 114.3 | 2.5 | 31 | |
125(5) | 133 | 2.5 | 31.5 | |
125⑸ | 139.7 | 2.5 | 31.5 | |
150⑹ | 159 | 2.5 | 31.5 | |
150⑹ | 165.1 | 2.5 | 31 | |
200⑻ | 219.1 | 2.5 | 36.5 |
THREADED FLANGE
NORMAL SIZE (mm/in) | OUTSIDE DIAMETER(mm) | WORKING PRESSURE(MPA) | DIMENSIONS(MM) | NO. OF HOLES | |||
A | B | c | D | ||||
25⑴ | Rcl | 1.6 | 18 | 10 | 85 | 110 | 4 |
32(1-1/4) | Rcl-1/4 | 1.6 | 18 | 11 | 100 | 130 | 4 |
40(1-1/2) | Rcl-1/2 | 1.6 | 19 | 13 | 110 | 145 | 4 |
50(2) | Rc2 | 1.6 | 20 | 13 | 125 | 155 | 4 |
65(2-1/2) | Rc2-1/2 | 1.6 | 21 | 15 | 144 | 178 | 4 |
80⑶ | Rc3 | 1.6 | 25.5 | 15 | 160 | 193.5 | 8 |
100⑷ | Rc4 | 1.6 | 25.75 | 15 | 180 | 213.5 | 8 |
BOLTS & NUTS
SIZE | THREADED LENGTH L1 | TOTAL LENGTH | FISHTAIL BOLT WIDTH | NUT WIDHT |
M10 x 55 | 30±3 | 55±1.2 | 14. 5±0. 5 | 9. 6~10 |
M10 x 60 | 30±3 | 60±1.2 | 14.5 + 0.5 | 9. 6~10 |
M10 x 65 | 30±3 | 65±1.2 | 14. 5±0. 5 | 9. 6~10 |
M12 x 65 | 36+4 | 65±1.2 | 15.2±0.4 | 11. 6~12 |
M12 x 70 | 36+4 | 70+1. 2 | 15.2±0.4 | 11. 6 ~12 |
M12 x 75 | 41+4 | 75+1. 2 | 15.2±0.4 | 11. 6 ~12 |
M16 x 85 | 44+4 | 85+1. 2 | 19. 0-19. 9 | 15. 3~16 |
M20 x 120 | 50+5 | 120+2. 0 | 24±0.8 | 18. 9~20 |
The mechanical properties of bolts shall not be lower than grade 8.8 specified in GB / T 3098.1, and the thread tolerance shall be 6G. The mechanical properties of the nut shall comply with Grade 8 requirements specified for nuts in GB / T 3098.2, thread tolerance 6h.
GASKET RING
NAME | GASKET | GENERAL SERVICE RECOMMENDATION | TEMPERATURE RANGE |
EPDM | E | Water supply, drainage, sewage and normal temperature air, weak acid and weak alkali | -30°C~+130°C |
NBR | D | Petroleum based oils | -20°C〜+80°C |
SILICOMN RUBBER | S | Drinking water, hot dry air and some hot chemicals | -40°C~+180°C |
WELDING NECK FLANGE
Standard: ASME/ANSI B16.9 Grade: WPB
NPS | OD | ID | Thickness | Unit Weight |
inch | mm | mm | mm | kgs |
1/2 | 89 | 21.3 | 11.5 | 0.5 |
3/4 | 99 | 26.9 | 13 | 0.7 |
1 | 108 | 33.7 | 14.5 | 1.1 |
1 1/4 | 117 | 42.4 | 16 | 1.5 |
1 1/2 | 127 | 48.3 | 17.5 | 1.8 |
2 | 152 | 60.3 | 19.5 | 2.7 |
2 1/2 | 178 | 73 | 22.5 | 4.4 |
3 | 190 | 88.9 | 24 | 5.2 |
3 1/2 | 216 | 101.6 | 24 | 6.4 |
4 | 229 | 114.3 | 24 | 7.5 |
5 | 254 | 141.3 | 24 | 9.2 |
6 | 279 | 168.3 | 25.5 | 11 |
8 | 343 | 219.1 | 29 | 18.3 |
10 | 406 | 273 | 30.5 | 25 |
12 | 483 | 323.9 | 32 | 39 |
14 | 533 | 355.6 | 35 | 51 |
16 | 597 | 406.4 | 37 | 60 |
18 | 635 | 457 | 40 | 71 |
20 | 698 | 508 | 43 | 88 |
24 | 813 | 610 | 48 | 119 |
BLIND FLANGE
Standard: ASME/ANSI B16.9 Grade: WPB
NPS | OD | ID | Thickness | unit weight |
inch | mm | mm | mm | kgs |
1/2 | 89 | 21.3 | 11.5 | 0.4 |
3/4 | 99 | 26.9 | 13 | 0.7 |
1 | 108 | 33.7 | 16 | 0.9 |
1 1/4 | 117 | 42.4 | 16 | 1.3 |
1 1/2 | 127 | 48.3 | 17.5 | 1.6 |
2 | 152 | 60.3 | 19.5 | 2.6 |
2 1/2 | 178 | 73 | 22.5 | 4.1 |
3 | 190 | 88.9 | 24 | 5 |
3 1/2 | 216 | 101.6 | 24 | 6.4 |
4 | 229 | 114.3 | 24 | 7.1 |
5 | 254 | 141.3 | 24 | 9 |
6 | 279 | 168.3 | 25.5 | 12 |
8 | 343 | 219.1 | 29 | 21 |
10 | 406 | 273 | 30.5 | 30 |
12 | 483 | 323.9 | 32 | 45 |
14 | 533 | 355.6 | 35 | 59 |
16 | 597 | 406.4 | 37 | 79 |
18 | 635 | 457 | 40 | 97 |
20 | 698 | 508 | 43 | 124 |
24 | 813 | 610 | 48 | 188 |
SLIP ON FLANGE
Standard: ASME/ANSI B16.9 Grade: WPB
NPS | OD | ID | Thickness | unit weight |
inch | mm | mm | mm | kgs |
1/2 | 89 | 22.5 | 11.5 | 0.4 |
3/4 | 99 | 28 | 13 | 0.7 |
1 | 108 | 34.5 | 14 | 0.8 |
1 1/4 | 117 | 43.5 | 16 | 1.1 |
1 1/2 | 127 | 49.5 | 17.5 | 1.4 |
2 | 152 | 62 | 19.5 | 2.2 |
2 1/2 | 178 | 73 | 22.5 | 3.6 |
3 | 190 | 90.5 | 24 | 4.1 |
3 1/2 | 216 | 103.5 | 24 | 5.2 |
4 | 229 | 116 | 24 | 5.6 |
5 | 254 | 144 | 24 | 6.3 |
6 | 279 | 170.5 | 25.5 | 7.5 |
8 | 343 | 221.5 | 29 | 12.6 |
10 | 406 | 276.5 | 30.5 | 18.5 |
12 | 483 | 327 | 32 | 28 |
14 | 533 | 359 | 35 | 36 |
16 | 597 | 410.5 | 37 | 46 |
18 | 635 | 462 | 40 | 50 |
20 | 698 | 513 | 43 | 64 |
24 | 813 | 616 | 48 | 89 |
THREADED FLANGE
Standard: ASME/ANSI B16.9 Grade: WPB
NPS | OD | ID | Thickness | unit weight |
inch | mm | mm | mm | kgs |
1/2 | 89 | 21.3 | 11.5 | 0.4 |
3/4 | 99 | 26.9 | 13 | 0.7 |
1 | 108 | 33.7 | 14.5 | 0.9 |
1 1/4 | 117 | 42.4 | 16 | 1.2 |
1 1/2 | 127 | 48.3 | 17.5 | 1.5 |
2 | 152 | 60.3 | 19.5 | 2.3 |
2 1/2 | 178 | 76.1 | 22.5 | 3.7 |
3 | 190 | 88.9 | 24 | 4.2 |
3 1/2 | 216 | 101.6 | 24 | 5.3 |
4 | 229 | 114.3 | 24 | 5.9 |
5 | 254 | 141.3 | 24 | 7 |
6 | 279 | 168.3 | 25.5 | 8.4 |
8 | 343 | 219.1 | 29 | 13 |
10 | 406 | 273 | 30.5 | 17.8 |
12 | 483 | 323.9 | 32 | 29.5 |
14 | 533 | 355.6 | 35 | 39 |
16 | 597 | 406.4 | 37 | 47 |
18 | 635 | 457 | 40 | 50 |
20 | 696 | 508 | 43 | 68 |
24 | 813 | 610 | 48 | 93 |
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..