Laser cutting is the most widely used processing method in the laser processing industry. The invisible light beam replaces the traditional mechanical knife, which has the characteristics of high precision, fast cutting, not limited to the limitation of cutting pattern, automatic typesetting, saving materials, smooth incision and low processing cost. It will gradually improve or replace the traditional metal cutting process equipment.
Function¶meter List | 24D | 20D | 16D | 12D | ||
●standard configuration, | ||||||
○optional configuration, | ||||||
×No configuration required | ||||||
Item | Subitem | |||||
Basic parameter | Working area | 24500mm*3200mm | 20500mm*3200mm | 16500mm*3200mm | 12500mm*3200mm | |
Max.linkage speed | 50m/min | 50m/min | 50m/min | 50m/min | ||
Automatic adjustment of cutting gas pressure | 6KW below:O2 | 6KW below:O2 | 6KW below:O2 | 6KW below:O2 | ||
6KW and above:O2、N2、air | 6KW and above:O2、N2、air | 6KW and above:O2、N2、air | 6KW and above:O2、N2、air | |||
Performance | Max.acceleration | 0.8G | 0.8G | 0.8G | 0.8G | |
Table load bearing | 34000KG | 28000KG | 23000KG | 17000KG | ||
Distance between rails | 4500mm | 4500mm | 4500mm | 4500mm | ||
Configuration | Optical system | laser head | 12KW and below:BLT/Ray Tools | 12KW and below:BLT/Ray Tools | 12KW and below:BLT/Ray Tools | 12KW and below:BLT/Ray Tools |
12KW and above:Germany Precitec/BLT | 12KW and above:Germany Precitec/BLT | 12KW and above:Germany Precitec/BLT | 12KW and above:Germany Precitec/BLT | |||
Laser source | MAX | MAX | MAX/IPG | MAX/IPG | ||
mechanical system | Gantry structure | High strength welding beam | High strength welding beam | High strength welding beam | High strength welding beam | |
X-axis、Y-axis、Z-axis Servo motor and driver | Japan Yaskawa | Japan Yaskawa | Japan Yaskawa | Japan Yaskawa | ||
Linear Rails | Made in Taiwan HiWin | Made in Taiwan HiWin | Made in Taiwan HiWin | Made in Taiwan HiWin | ||
Rack | Made in Taiwan YYC | Made in Taiwan YYC | Made in Taiwan YYC | Made in Taiwan YYC | ||
Machine bed | Segmented type rail lathe bed | Segmented type rail lathe bed | Segmented type rail lathe bed | Segmented type rail lathe bed | ||
Enhanced-partition Dust Removal | ○ | ○ | ○ | ○ | ||
Electrical system | Control system | FSCUT2000S | FSCUT2000S | FSCUT2000S | FSCUT2000S | |
8kw:FSCUT8000 | 8kw:FSCUT8000 | 8kw:FSCUT8000 | 8kw:FSCUT8000 | |||
Electrical proportional valve | Japan SMC/Germany AVENTICS | Japan SMC/Germany AVENTICS | Japan SMC/Germany AVENTICS | Japan SMC/Germany AVENTICS | ||
O2 Cutting gas control valve | Japan SMC | Japan SMC | Japan SMC | Japan SMC | ||
N2Cutting gas control valve | 4KW and below:Japan SMC | 4KW and below:Japan SMC | 4KW and below:Japan SMC | 4KW and below:Japan SMC | ||
6KW and above:Germany AVENTICS | 6KW and above:Germany AVENTICS | 6KW and above:Germany AVENTICS | 6KW and above:Germany AVENTICS |
With the continuous development and strength of China’s laser cutting machine industry, the increasing number of types of laser cutting machines, the continuous enrichment of laser cutting machine models, and the continuous improvement of product quality produced by major laser cutting machine enterprises. A major breakthrough has been made in the development and production of domestic laser cutting machines. laser relies on its strong R & D strength and excellent product quality, based on the whole country and looking at the world. When the industry’s requirements for the format of cutting machines are constantly improving, laser super large format D series models are born. This model supports the customization of super large format and super long fuselage, can place a variety of plates and has a wide range of processing materials. Intelligent processing, there is no need to replace the plate halfway, so as to improve the work efficiency. Truly achieve “private customization”!
The main body of the equipment adopts the welding bed process, which has high mechanical strength, relatively short production cycle, easy to organize production and lower thermal sensitivity.
The laser adopts international advanced technology and the unique cutting process database can carry out different intelligent cutting for different materials, optimize the cutting surface, cut a wider range of materials, faster speed, better quality and lower cost, and can be applied to the full coverage of low-power to high-power lasers.
The laser head can automatically avoid obstacles. The laser head can carry out high dynamic response, predict obstacles in advance and protect the laser head to the greatest extent.
Steel beam is adopted, with high speed. High strength, good plasticity and toughness. Uniform material and high working reliability. The steel structure has the advantages of simple manufacture, short construction cycle and good assembly.
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..