The Flooring Expert

The 3TREES Odorless Mould-Proof & Moisture-Proof Wall Paint (No Additives) is an interior wall emulsion paint with outstanding anti-fungus and anti-moist performance. The product adopts microporous breathing and ventilation technology and can effectively avoid wall problems caused by moisture. At the same time, it has efficient anti-fungus functions and can effectively resist 8 kinds of common household molds, and reach Class-0 fungus resistance (the highest level), effectively prevent the growth of fungi and molds on the wall, and make walls cleaner and durably bright.

Adhering to 3TREES’s consistent environmental pursuit, the product is made from selected raw materials, without added harmful substances such as formaldehyde, benzene, VOCs or APEOs. It has passed UL GREENGUARD Gold Certification and French Indoor Air Emissions A+ Certification and meets the more stringent Health+ Water-Based Coating Standard, thus providing better home protection.

Product use: It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes, especially in spaces prone to damp.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

No addition of 7 additives

Outstanding Features, Superior Performance

Efficient resistance to fungi, with Class-0 anti-fungus performance (the highest level) and can keep walls away from fungal erosion

Strong anti-moist performance: Adopt microporous breathing and ventilating technology to effectively avoid moist-induced wall defects

Practical Solution to Common Wall Problems

Excellent hiding power

Resistance to scrub

Strong resistance to alkali

Endurable brightness

Easy application

1. Free from 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), excessive heavy metal pigments and fillers, APEO, ethylene glycol ether and ether ester, as well as PAEs. For details, refer to the China Environmental Labelling Product Certification Requirements.

2. Class-0 anti-fungus performance: According to GB/T 1741-2007 Test Method for Determining the Resistance of Paints Film to Mold, Class-0 anti-fungus performance means that there is no obvious mold growth under 50x magnification.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with an appropriate amount of clean water (until reaching the appropriate application viscosity). The dilution ratio should not be higher than 20% (weight ratio).

Theoretical paint consumption: 12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, hard drying 2 hours, and recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature (not less than 5℃), high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) – primer (360 Multi-Effect Mouldproof Allround Primer) – apply 1 round – topcoat (Odorless Mould-Proof & Moisture-Proof Wall Paint (No Additives)) – apply 2 rounds

Tool Cleaning:

After or between applications, please clean the tools with clean water in time in order to prolong tool life.

The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.