Model | OPP-10PV | OPP-15PV | OPP-20PV | OPP-30PV | OPP-40PV | OPP-50PV | OPP-60PV | OPP-75PV | |
Power (kw) | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | 55 | |
Horsepower (hp) | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 75 | |
Air displacement/ Working pressure (M³/Min. / bar) |
1.2 / 7 | 1.6 / 7 | 2.5 / 7 | 3.8 / 7 | 5.3 / 7 | 6.8 / 7 | 7.4 / 7 | 10.0 / 7 | |
1.1 / 8 | 1.5/8 | 2.3/8 | 3.6 / 8 | 5.0 / 8 | 6.2 / 8 | 7.0 / 8 | 9.2 / 8 | ||
0.9 / 10 | 1.3 / 10 | 2.1 / 10 | 3.2 / 10 | 4.5 / 10 | 5.6 / 10 | 6.2 / 10 | 8.5 / 10 | ||
0.8 / 12 | 1.1 / 12 | 1.9 / 12 | 2.7 / 12 | 4.0 / 12 | 5.0 / 12 | 5.6 / 12 | 7.6 / 12 | ||
Air out let diameter |
DN20 | DN25 | DN25 | DN25 | DN40 | DN40 | DN40 | DN50 | |
Lubricating oil volume (L) | 10 | 16 | 16 | 18 | 30 | 30 | 30 | 65 | |
Noise level dB(A) | 60±2 | 62±2 | 62±2 | 64±2 | 66±2 | 66±2 | 66±2 | 68±2 | |
Driven method | Direct driven | ||||||||
Type | PM VSD | ||||||||
Start method | Variable frequency start | ||||||||
Length (mm) | 950 | 1150 | 1150 | 1350 | 1500 | 1500 | 1500 | 1900 | |
Width (mm) | 670 | 820 | 820 | 920 | 1020 | 1020 | 1020 | 1260 | |
Height (mm) | 1030 | 1130 | 1130 | 1230 | 1310 | 1310 | 1310 | 1600 | |
Weight (kg) | 250 | 400 | 400 | 550 | 700 | 750 | 800 | 1750 |
Model | OPP-100PV | OPP-125F | OPP-150PV | OPP-175PV | OPP-200PV | OPP-275PV | OPP-350PV | |
Power (kw) | 75.0 | 90 | 110 | 132 | 160 | 200 | 250 | |
Horsepower (hp) | 100 | 125 | 150 | 175 | 200 | 275 | 350 | |
Air displacement/ Working pressure (M³/Min. / bar) |
13.4 / 7 | 16.2 / 7 | 21.0 / 7 | 24.5 / 7 | 32.4 / 7 | 38.2 / 7 | 45.5 / 7 | |
12.6 / 8 | 15.0 / 8 | 19.8 / 8 | 23.2 / 8 | 30.2 / 8 | 36.9 / 8 | 43 / 8 | ||
11.2 / 10 | 13.8 / 10 | 17.4 / 10 | 20.5 / 10 | 26.9 / 10 | 33/ / 10 | 38.9 / 10 | ||
10.0 / 12 | 12.3 / 12 | 14.8 / 12 | 17.4 / 12 | 23 / 12 | 28.5 / 12 | 36 / 12 | ||
Air out let diameter |
DN50 | DN50 | DN65 | DN65 | DN75 | DN90 | DN90 | |
Lubricating oil volume (L) | 65 | 72 | 90 | 90 | 110 | 130 | 150 | |
Noise level dB(A) | 68±2 | 70±2 | 70±2 | 70±2 | 75±2 | 85±2 | 85±2 | |
Driven method | Direct driven | |||||||
Type | PM VSD | |||||||
Start method | Variable frequency start | |||||||
Length (mm) | 1900 | 2450 | 2450 | 2450 | 2760 | 2760 | 2760 | |
Width (mm) | 1260 | 1660 | 1660 | 1660 | 1800 | 1800 | 1800 | |
Height (mm) | 1600 | 1700 | 1700 | 1700 | 2100 | 2100 | 2100 | |
Weight (kg) | 1850 | 1950 | 2200 | 2500 | 2800 | 3100 | 3500 |
1. Fast response to load
The load reaction action is very fast, the traditional screw machine will affect the reaction speed with the change of processing time during the operation, but this new frequency conversion screw machine will not;
2.Low motor friction
In the structural design of the body, there is no bearing, which effectively avoids the friction between the bearing and the rotor, and there is no need to do too much maintenance on the motor during daily use;
3.High transmission efficiency
This variable frequency permanent magnet screw machine has undergone a great change in transmission, and adopts the direct transmission mode to reduce the energy loss during the transmission process, especially when the main engine and the motor are connected together;
The frequency conversion permanent magnet screw machine has fast response speed, low motor friction, high transmission efficiency, and high use value of the body, especially suitable for large factories.
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..