The Flooring Expert

Recessed inner-opening inner-reversing hardware system for fireproof Windows

Short Description:

Hardware for UPVC Tilt&turn window, which is an ideal Recessed inner-opening inner-reversing hardware system solutions for UPVC Windows.1. Customers can choose other types of handles according to the introduction of handle series in the product list window.2. Can be used for European groove cavity of aluminum alloy profiles.3. Square steel length L= fan profile thickness +35~40mm, installation screw length (M5) L= fan profile thickness +15mm.


Product Detail

Product Tags

Details And Data Sheet

This hardware assembly is suitable for aluminum alloy grade 20 slot aluminum alloy profilesScope: Fan width sk:500-800mm, fan height sg:600-1500mmWhen the height direction is greater than 1000mm, the number of steering angle (B) and locking points shall be increasedHold on to a variety of formal choicesHinge (closed page) 3 D adjustableThe sg/sk window type ratio is recommended at 1.5: 11

Fire resistant windows with concealed internal open inverted hardware System

 Series No.

 Parts Name

 Material No.

 Remark

1

Upper hinge

LND-0110196-1

Points around

2

Steering angle

LND-0110196-2

3

Lock block

LND-0110196-3

4

Anti-mistransmission lever

LND-0110196-4

5

Misoperation prevention

LND-0110196-5

6

Flip support

LND-0110196-6

7

Anti-dropping device

LND-0110196-7

8

Two-hole button

LND-0110049-8

9

Booster pad

LND-0110196-9

10

Bottom hinge

LND-0110196-10

Points around

11

European style wind bracing

LND-0110196-11

12

Steering angle

LND-0110196-12

13

Side drive rod

LND-0110196-13

14

Second lever

LND-0110196-14

15

Handle parts

LND-0110196-15

There are a variety of handles to choose from: Square handle, curved handle, big round handle, small round handle

Precautions:1. Customers can choose other types of handles from our company according to the introduction of the handle series in the product list window.2. Aluminum alloy profile that can be used for European-style groove cavity.3.The length of the square steel L = the thickness of the fan profile + 35 ~ 40mm, the length of the mounting screw (M5) L = the thickness of the fan profile + 15mm.

3

2

Calculation formula for the hole distance dimension of the top aluminum drawing plate (for reference only):L1=SK-221 The sk is of the fan width sizeCalculation formula of the hole distance dimension of the handheld side aluminum drawing plate:L2=SG-H-297 H is the handle installation position:L3=H-172 The sk is of the fan width sizeThe calculation formula of aluminum plate is calculated according to the size of window fan is 22mm. The dimensions of window fan side of different manufacturers are not identical. Please measure carefully.

Fire resistant windows with concealed internal open inverted hardware System

4

Installation processInstallation diagram of aluminum alloy inner casement window seriesHardware installation sequenceInstall according to Figure 1, Figure 2, Figure 3…5

Our Advantages1. The raw materials of the castings are made of four-in-one zinc alloy, and the advanced material formula (±50 ℃) does not deform or break.2. All stainless steel parts are made of 304 material, containing 7.5-8.5 nickel, which does not rust.3. The plastic parts in the fitting system are made of high-strength wear-resistant nylon PA66 material, which will never be damaged.4. The spraying part is sprayed with polyurethane material, the thickness is 45μm-100μm, and the dry adhesion is more than 10 grades, all exceeding national standards5. The production equipment for zinc and aluminum die-casting machine is 120Ton, and the automatic punching machine is 180Ton,which ensure the hardness, strength and toughness of the casting. Inward opening, inverted, inner and outer casement windows open and close 450,000 times of opening and closing cycles, no distortion of parts, normal use6. The surface treatment of the plated parts is a trivalent chromium electroplating process, the thickness of the plating layer is 45μm-100μm, and the salt spray test is 120 hours without pinholes, bulging and rust.After nearly a year of repeated research and designing a mold opening test, Yuqiang Hardware has successfully improved the aluminum alloy casement window hinges, connectors, and inner opening and inverted hinge chains from the original aluminum alloy extrusion material to carbon steel. Stamping parts ensure that the load-bearing capacity of the accessories is increased. The original aluminum alloy hinges can load 70kg, and the carbon steel hinges can load up to 180kg without deformation or fracture.It has fundamentally solved the load-bearing problem of super-standard large windows and triple-glazed windows. Now this product has been declared a national patent, leading other domestic brands.Production Process1Buying Proceduresbuying procedures


  • Previous:
  • Next:

  • Write your message here and send it to us