The Flooring Expert

Tianhongyi elevator door panels are divided into landing doors and car doors. The ones that can be seen from the outside of the elevator and are fixed on each floor are called landing doors. It is called the car door. The opening and closing of the elevator landing door is realized by the door opener installed on the car door. Each floor door is equipped with a door lock. After the landing door is closed, the mechanical lock hook of the door lock engages, and at the same time the landing door and the car door electrical interlocking contact are closed, and the elevator control circuit is connected, then the elevator can start running. The car door safety switch can ensure that the elevator cannot operate normally when the door is not safely closed in place or is not locked. The landing door is generally composed of the door, the guide rail frame, the pulley, the sliding block, the door cover, the sill and other components. We make it according to the door manufacturer, door panel width, door panel height, and material of the door panel provided by the customer. We can also make new designs according to your sketches.The main door opening methods are: center split, side split double fold, center split double fold, etc. The most common is the center split, the opening width is 700~1100mm, and the opening height is 2000~2400mm. We can provide different colors: paint, stainless steel, mirror, etching, titanium gold, rose gold, black titanium, etc. In order to make the door have a certain degree of mechanical strength and rigidity, reinforcing ribs are provided on the back of the door to ensure its strength, durability and safety. Elevator door covers are divided into small door covers and large door covers. Generally, a small door cover must be included as a factory standard. This door cover is installed to cover the gap between the elevator car and the outer wall and to beautify the elevator room. It is generally made of stainless steel. The door cover is a new type of elevator decoration door cover. It is made of various materials, not only stainless steel, but other materials with imitation stone patterns are also available; including zinc-steel integrated door cover, nano-stone plastic door cover and so on. On the one hand, it can play a role in decorating the elevator, and on the other hand, it can make up for the problems left in the civil construction process; for example, if the distance between the wall and the small elevator door frame is large, it needs to be decorated with a door cover.