The Flooring Expert
XZWD factory supply slewing mechanism use swing bearing
The slewing mechanism is composed of a supporting device, a slewing bearing and a turntable. The slewing bearing is an important force-bearing component. It not only bears the dead weight of the rotating part of the crane, but also bears the vertical force of the lifting load and the force of the tipping moment. During use, there must be wear and tear, and the performance of related mechanical parts will gradually deteriorate or even be damaged.
Common faults of the slewing mechanism mainly include excessive slewing bearing clearance (wild movement), slow movement (weakness) or immobility of the slewing system, abnormal system pressure, and oil leakage. How can I solve a problem?
1. The slewing bearing clearance is too large (open movement)
This is because the worm gear, driving gear and slewing ring gear of the slewing reducer are seriously worn. Please check the clearance with a dial indicator. If it is too large, the slewing ring bearing should be disassembled and replaced and related parts replaced.
2. The slewing system moves slowly (weak) or does not move
The hydraulic motor is malfunctioning, the reducer is malfunctioning, there is an overload, the overflow valve, the manual control valve is malfunctioning. Damage to the gear of the slewing reducer, the plunger or bearing of the hydraulic motor is stuck or severely worn, and the output shaft of the hydraulic motor is broken. These problems will cause the slewing system to move slowly or not move. Check and adjust the faulty parts and replace them if necessary. If it is overloaded, check the lifting weight again.
3. System pressure is abnormal
4. Oil spill
WHY CHOOSE US
Since its establishment, our factory has been developing first world class products with adhering the principle
of quality first. Our products have gained excellent reputation in the industry and valuabletrusty among new and old customers..